The Axis DB safety post is an anchoring device fixed to a C24 class timber beam and is used to secure personal protective equipment against falls from a height.
The Axis DB safety post is an anchoring device fixed to a C24 class timber beam and is used to secure personal protective equipment against falls from a height.
The Axis DB safety post is an anchoring device fixed to a C24 class timber beam and is used to secure personal protective equipment against falls from a height.
The AXIS DB safety post complies with the requirements of Type A/C standard EN 795: 2012 and technical specification CEN / TS 16415: 2013, and is permanently installed for C4 class timber.
The beam must be at least 1450 mm high and 100 mm wide in cross-section. AXIS DB is intended as an end and corner support in the AccenLine cable system. When installed with a Trax badge, it can be used as a free-standing post.
It is fixed with 4 M12 metric threaded rods.
