The AXIS B safety post is intended for use as an anchor point protecting from falling from a height for three people at the same time.
It was developed for the purpose of securing people working at heights. It is basically used as end / corner supports in horizontal ACCENLINE rope systems according to the EN 795 C standard, but has been successfully used as an anchor point, e.g. in rope access.
The AXIS B safety post is intended for use as an anchor point protecting from falling from a height for three people at the same time.
It was developed for the purpose of securing people working at heights. It is basically used as end / corner supports in horizontal ACCENLINE rope systems according to the EN 795 C standard, but has been successfully used as an anchor point, e.g. in rope access.
AXIS B safety post is made entirely of stainless steel (material 1.4301). The total maximum height of the post is up to 1000 mm. Standard post base dimensions: 220 x 220 mm, diameter 50 mm. On the post, a fastening point with a swivel can be mounted allowing it to rotate in all directions 360°.
This prevents the formation of loops when the safety line is fastened. It is fixed to the reinforced concrete substrate (min. class C20/25) using M12 mechanical anchors or chemical adhesive mortars. AXIS B post meets the requirements of the standard for anchoring devices EN795, class A, C and CEN/TS 16415.
