The ACCEN GUARD barrier system is a collective protection against falls from a height on the roof surface. It is made of aluminum closed profiles. The handrail is set at a height of 1100mm above the roof surface, and in the middle of the height a crossbar is attached, a curb beam is optionally installed. The barrier’s stability is ensured by a concrete counterweight mounted at the end of the arm. This counterweight, like the front plate, is covered with a plastic cover to avoid damage to the roof covering.
The ACCEN GUARD barrier system is a collective protection against falls from a height on the roof surface. It is made of aluminum closed profiles. The handrail is set at a height of 1100mm above the roof surface, and in the middle of the height a crossbar is attached, a curb beam is optionally installed. The barrier’s stability is ensured by a concrete counterweight mounted at the end of the arm. This counterweight, like the front plate, is covered with a plastic cover to avoid damage to the roof covering.
The modular design allows for any configuration of railings, taking into account any corner setting, height of railing and crossbar. The railing system can be easily expanded, moved to another place or changed its layout. Barriers can be used on most flat roofs of any shape and slope up to 3 degrees: bituminous, concrete, asphalt and membrane roofs. The ACCEN GUARD barrier system meets the requirements of static and dynamic tests in accordance with the requirements of EN ISO 14122-3. It ensures safety for users who work at height, thus guaranteeing the requirements of compliance with the Regulation of the Minister of Labour and Social Policy of 26 September 1997 on the general provisions of occupational safety and health.
