• English
    • Polish
    • German
    • Czech
email

Anchorage
points

AXIS B

The AXIS B safety post is intended for use as an anchor point protecting from falling from a height for three people at the same time.

It was developed for the purpose of securing people working at heights. It is basically used as end / corner supports in horizontal ACCENLINE rope systems according to the EN 795 C standard, but has been successfully used as an anchor point, e.g. in rope access.

  • Axis B -3 belaying post
  • Accen-  Axis B belaying post for three people
  • Personal protection for three people - Axis B belaying post

The AXIS B safety post is intended for use as an anchor point protecting from falling from a height for three people at the same time.

It was developed for the purpose of securing people working at heights. It is basically used as end / corner supports in horizontal ACCENLINE rope systems according to the EN 795 C standard, but has been successfully used as an anchor point, e.g. in rope access.

AXIS B safety post is made entirely of stainless steel (material 1.4301). The total maximum height of the post is up to 1000 mm. Standard post base dimensions: 220 x 220 mm, diameter 50 mm. On the post, a fastening point with a swivel can be mounted allowing it to rotate in all directions 360°.

This prevents the formation of loops when the safety line is fastened. It is fixed to the reinforced concrete substrate (min. class C20/25) using M12 mechanical anchors or chemical adhesive mortars. AXIS B post meets the requirements of the standard for anchoring devices EN795, class A, C and CEN/TS 16415.

Technical Specifications Material: INOXWeight: 4 kgSize: 300x1000 mmUsers: 3Norm: EN 795 A,C, CEN/TS 16415Warranty: 12 month
Related Products
Contact us
Contact form








This site is protected by reCAPTCHA i Google. Privacy policy. + Terms of Service.

*fields marked with an asterisk are mandatory

Directions
ACCEN Fall Arrest Sp. z o.o.
ul. Gzichowska 115
42-500 Będzin